Answer this Question (5 Answers)

• When you take the old one off, use a couple of clothes pegs on the ends of the wires/spade connectors to stop them springing back into the oven. It's an appliance out and back off the unit recovery if you lose a wire inside! By Scott Newcombe - Essex - 13 October 2017
• Its really super simple, unscrew guard in oven, unscrew the screws holding the element in place and there are 2 electrical clips attached to the element. Carefully pull the clips out one by one and re- attach to the new element, screw back in place and oven is ready to go. By pager1968 - south tyneside - 25 May 2010
• take to screws on back plate out revealing the element take 2 screws holding it on and take element out taking off the earth and live wire putting these back on new one and reverse op its easy and could save you pounds By jeff3 - neath - 29 April 2010
• very easy to fit. By washer12 - widnes - 28 April 2010
• 

  Rory at eSpares says...

  Hi Pillpusher, attached is a link to a video on how to fit a fan oven element. While the demo is for a different brand, the general process remains very similar. http://www.youtube.com/watch?v=bZy8HBwSzos Hope this helps.