Over 1 million spare parts
Over 500 brands
Over 800 appliance repair videos
How to remove the existing impeller on my XL 500?
I have removed the blade but cannot budge the old impeller. It looks to have a spacer(?) inside it or is it just part of the impeller. I have tried brute force but no luck. I need to remove the impeller to replace the hood which is split
Answer this Question (2 Answers)
- Well done Allen many thanks, Bingo it works 12mm tap the aluminium, then a thin 65mm bit of bar/stud, and push up the hole, and get a 12mm bolt, screw into the thread made which then pushes against the bar/stud, and happy days the impeller slides of, and might be a good idea to put some ant seize grease when putting back together
- I HAD THE SAME PROBLEM AS DAC,THE IMPELLER WOULD NOT BUDGE & LAST RESORT WAS TO CUT IT OFF. WITH A NEW ONE COSTING £35.(EXSPENSIVE LESSON.) WHAT LOOKS LIKE A SPACER IS A LARGE BLOCK OF ALIMINIUM WITH THE PLASTIC IMPELLER ALL MOLDED INTO ONE. THE IMPELLER IS ONLY HELD ON BECAUSE IT IS A VERY TIGHT FIT. WITH THE BLADE OFF & BOLT OUT. DRILL & TAP THE CENTER OF THE IMPELLER BLOCK.(ALUMINIUM.) SCREW A BOLT INTO THE TAPPED TREAD (USE SMALL THIN EXTENTION BARS TO FIT.) WHICH THEN PUSH,s ON THE SHAFT AND PULL,s ON THE IMPELLER. HOPE YOU CAN UNDERSTAND THIS. ALAN.
Lawnmower Impeller Fan Stock Number: ES1537268
Genuine spare part for select models of Flymo lawnmowers
Q&A tips & guidelines
-
Focus on the features or function of the product
-
Write your question in clear English
-
Be polite! Profanity won't be approved
-
Don't include personal info
-
Don't name other websites
-
Don't mention product prices