Over 1 million spare parts
Over 500 brands
Over 800 appliance repair videos
if this part fails, does the dishwasher fail to fill?
MY favorit refuses to fill - and I have tried everything else. When I remove the existing overflow valve and empty it, shake it around and refit it, I get one cycle out of the machine, then I am back to square one.
Answer this Question (2 Answers)
- My DH102 had the same fault, it had been working on and off for some time but finally totally failed. The total failure was this valve which stopped the dishwasher from filling at all. The intermittent problem was the device behind the left hand side panel. The test is simple you simply put the dishwasher on its right side for 5 seconds (power off!). If that fixes the problem for a week then you need to clean out this device! Its a horrible job but it fixes the dishwasher. Rob
-
Rory at eSpares says...
Hi Skipton, it sounds as if the inlet valve in your washer is either blocked or faulty. Check for blockage, and if it still doesn't work, quote me your washer's specific model number and I will locate the valve you need.
Dishwasher Anti-Overflow Single Inlet Solenoid Valve Stock Number: ES538842
Genuine Spare Part for select AEG, Corbero, Electrolux, Tricity Bendix and Zanussi dishwashers
Q&A tips & guidelines
-
Focus on the features or function of the product
-
Write your question in clear English
-
Be polite! Profanity won't be approved
-
Don't include personal info
-
Don't name other websites
-
Don't mention product prices