will this fit
Have a TVR 2 drier,there are no screws from inside drum,part of old shaft is still on drum. Am I right in thinking if I grind this off to leave flat surface this or kit with bearing will then fit with screws from inside. Looks like it is shoulder from old pin that has broken.Or does it screw out,have not tried that but can grind off if needed. Or is it recessed to take the shoulder left on.
Answer this Question (1 Answer)
-
Chris at eSpares says...
It should be possible to carefully drill out the 'rivets' pushed into the shaft plate to remove the old one. Then use the new one and the supplied self tapping screws to fit the hub to the other holes on the back of the drum.
Tumble Dryer Drum Shaft Stock Number: ES664022
Genuine spare part for select Ariston, Creda, Crusader, Hotpoint, Indesit, Jackson and Proline dryers
Q&A tips & guidelines
-
Focus on the features or function of the product
-
Write your question in clear English
-
Be polite! Profanity won't be approved
-
Don't include personal info
-
Don't name other websites
-
Don't mention product prices