I have a Hoover VHC681B that stops after approx 1 minute and all the lights are flashing
The heater element has failed, both sensors on the heater casing are ok. Is there anything else that could be wrong or require checking as the machine is not yet two years old
Answer this Question (1 Answer)
-
Chris at eSpares says...
It is important to allow tumble driers to complete there cycle as many will run a cool down cycle to remove the heat from the element. If stopped early this can cause the element to overheat and fail. Check the condenser if fitted is not blocked with fluff as this too can cause overheating and failure.
Tumble Dryer Heater Element Irca S 9276 845 - 2100W Stock Number: ES956282
Genuine spare part for select models of Hoover, Candy and Maytag tumble dryers
Q&A tips & guidelines
-
Focus on the features or function of the product
-
Write your question in clear English
-
Be polite! Profanity won't be approved
-
Don't include personal info
-
Don't name other websites
-
Don't mention product prices