Dishwasher Drain Pump - 30W Stock Number: ES1131255
Genuine spare part for select models of Hotpoint, Indesit, Whirlpool and Bauknecht dishwashers
Manufactured by Whirlpool
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Dishwasher Drain Pump - 30W
If the water isn't draining properly from your dishwasher it could be the drain pump causing the problem. The drain pump in your dishwasher is a key component of the cleaning process, as it removes the unclean water from the machine at the end of the wash cycle. This replacement spare from eSpares could be just the solution for you. We could soon have you back to a fully working dishwasher in no time!
Specification:
- Type: COPRECI 3 KEBS 105/011A 160023601
- Watts: 30w
Genuine spare part for select models of Hotpoint, Indesit, Whirlpool and Bauknecht dishwashers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
4 Questions and 4 Answers
model FDFEX11011K dishwasher getting F05 error 2 mins after starting cycle
-
eSpares Staff at eSpares says...
Please check out our advice centre for help www.espares.co.uk/advice/symptom/hotpoint-dishwasher-fdl-range-error-code-f05 just copy and paste into your browser.
I have a hotpoint dishwasher Lft321 HX. The on/ off flashing and number 11 appears on the display 1 Answer
-
eSpares Staff at eSpares says...
Error code F11 refers to the wash pump motor has failed.
have a hotpoint SIAL11010P, just over a year old. Works ok on its first fill and wash cycle, then goes to drain and times out, with the pump still running and salt/rinse lights flashing. Could this be pump blockage? 1 Answer
Daughter did place a bowl of home made slime in dishwasher, which may have caused this - but all ingredients were food/soap based. I've tried running it with drain pipe outside and it seems a good pressure when draining, but still goes to fail mode. Checked the anti flood and this seems ok, next stop pump?
-
Dean at eSpares says...
It is likely that the slime is blocking the dishwasher, check the pump first and the surrounding hoses for any blockage.
Hi, the drain pump on our dishwasher runs (hums) and when I dismantled the pump and drain pipe it worked ok before failing again... the lights indicate that the pump is either failing or timing out. Would it be a case of replacing the pump or something else? Does the pump contain a sensor as well? Thanks!
-
Chris at eSpares says...
For information to diagnose your problem see our video: How to diagnose washing machine drain and pump problems: www.espares.co.uk/advice/7/1732
Will this part fit my appliance?
Check Now
