Dishwasher Aquastop Water Inlet Valve Kit Stock Number: ES544310
Genuine spare part for select Bosch, Neff, Siemens, Smeg and DeDietrich dishwashers
Manufactured by Bosch
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Dishwasher Aquastop Water Inlet Valve Kit
If water isn't entering your dishwasher correctly - if the spray arms aren't generating the pressure required to spray water to the dishes in your dishwasher basket, then there is likely to be a problem with a valve inside your dishwasher.
The solenoid valve controls a spring-loaded plunger which opens and closes the valve to block or let through the pressurised water. Use this electronic valve to help ensure that your dishwasher's water enters the dishwasher correctly, and that water doesn't flow to your dishwasher when it isn't being used.
Genuine spare part for select Bosch, Neff, Siemens, Smeg and DeDietrich dishwashers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
2 Questions and 1 Answer
Old solenoid was open circuit/burned out. Dishwasher does not cycle properly now - with the pressure pipe connected to the diaphragm assembly, but works fine with the pipe disconnected. There is clearly enough pressure in the pipe, at certain times in the cycle, to activate the very sensitive rubber diaphragm, block water flow, and bring the cycle to a standstill. Are there differing sensitivity/stiffnesses of diaphragm available or............. is there some kind of reset process required after replacement of assembly such that the aquastop assembly only activates when it should - rather than immediately it senses the slightest positive pressure? Thanks
-
Chris at eSpares says...
If there is a leak on the inner hose water will flow into the surround and turn off the valve. Check there is no leak of the inner hose and replace if required.
bosch dishwasher exxcel sms50e12
Will this part fit my appliance?
Check Now
