HDO001 Bump Feed Trimmer Head Stock Number: ES971078
Universal trimmer head with adaptor kit to fit most leading brands of petrol trimmers
Manufactured by Universal Powered by McCulloch
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
HDO001 Bump Feed Trimmer Head
If your trimmer has stopped working properly there may be a problem with it's head. You can stop worrying now as eSpares has the perfect replacement part for you. This bump feed trimmer head from Universal Outdoor Accessories will get your trimmer back to 100%.
Specification:
- Type: HDO001
- P25
- Cord Length: 4m
- Cord Diameter: 2mm
- Number of cords: 2
Genuine spare part suitable for select models of Flymo, McCulloch and other brands of trimmers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
4 Questions and 4 Answers
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
I need to change the threading on the top of the strimmer head to accept a left hand thread bolt on my strimmer. One of the adaptors (the black one) is a left hander and the correct diameter, but I can't work out how to switch adaptors. Thanks
- Hello Nigelew, I hope by now you have resolved your problem. I'm sorry I didn't get to you sooner. To replace the threading is very straight forward; first open the head as if to replace the cord. 2. Then remove the cord holder by pulling straight out. 3. This will reveal a black plastic cog wheel which is spring loaded. 4. Press down this cog wheel and move from side to side, this will loosen it up a bit and it should pull straight off revealing a spring on which the adapter is attached. 5. The adapter will pull off the spring fairly easily. 6. Replace with the correct adapter and replace black cog wheel ensuring it is lined up to the slots on the yellow base. 7. Replace cord holder. Job done. I hope this is of use to you.
what do i need to change my Cbrio 246 from a bruch cutter head to a strimmer cord head
- I think what you need is the part above Stock Number: ES971078. Mine came with all the parts included but the brush cutter is only really necessary for the thickest scrub with heavy shrubs. The strimmer cord head will take cord of various thicknesses and is colour coded. I use orange which I think is about 30mm and it is very effective. Best of luck.
Will this part fit my appliance?
Check Now
