Cooker Hood Halogen Lamp Assembly Stock Number: ES545207
Genuine spare part for select models of Siemens, Bosch and Neff cooker hoods
Hi can you explain how I remove the light assembly. I can't see how to squeeze the clips together to remove it. Thanks 1 Answer
-
Dean at eSpares says...
The clips can be pushed from the inside once you have gained access, remove the connection and then squeeze the clips and push forward to release.
-
eSpares Staff at eSpares says...
The lamps are not sold separately and only come in the sealed unit so we unable to advise.
-
Chris at eSpares says...
This lamp assembly pushes into the hole in the cabinet and the two spring clips on left and right of the image spring out to hold in place. Squeeze these clips together to allow removal.
This Neff Cooker Hood Halogen lamp looks very similar to the 2 fitted to my Neff Cooker Hood. However, the lamps I have are not working because the ceramic bulb holders within the fitting appear to be worn and they will not hold the bulb in place to make an electrical contact. It is very fiddly to replace the bulbs and when they will not work unless I hold them in place with a piece of kitchen towel very frustrating. I wondered if I could replace them with a more conventional down lighter - but something that would withstand the steam? Your advice would be much appreciated. Thanks.
- Replace the lamp assembly, works ok for me, I had the same problem.....21/09/2012
-
eSparesMalindi at eSpares says...
Unfortunately we do not have any guides or fitting instructions for this part. Please contact the manufacturer of your appliance or a technician for help.
Is it possible to buy just the glass twist-on cover for this lamp, instead of the whole light? 1 Answer
-
Rory at eSpares says...
Hi Tinyhouse2, I'm afraid the lamp only comes as a whole part; that is, it is not possible to buy any separate components of this part.
Will this part fit my appliance?
Check Now