Fan Oven Element - 2500W Stock Number: ES1019477
High quality spare part for select models of AEG, Electrolux, Moffat, Tricity Bendix and Zanussi ovens
Manufactured by Electruepart
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
High Quality Compatible Fan Oven Element - 2500W
If your oven is turning on but you still find it isn't getting hot, it could be a problem with the heating element. Don't worry though, now you can fix it yourself and save some hard-earned cash with eSpares. This compatible spare element can be installed to ensure your oven is back to its best in no time.
Specification:
- 3 Turns
- 2500 watts
- Height: 225 mm
- Width: 192 mm
- Tags: 92 mm
Compatible spare part suitable for select models of AEG, Electra, Electrolux, Moffat, Parkinson Cowan, Tricity Bendix and Zanussi ovens.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
9 Questions and 9 Answers
- Also, sharp blow with a hammer to screwdriver end may help. It did with me
-
Chris at eSpares says...
To remove a rusted screw spray with a releasing fluid like WD40 and find a screwdriver that fits the screw as close as possible. Try to tighten slightly as the screw head will usually be less worn in this direction and may start to turn, then undo if it has moved. If the screw is damaged try gripping with side cutters or pliers across the head and twist with a jerk. If all else fails you may have to drill it out.
I brought a replacement Element for Lower oven from espares, Replaced as instructions and have doubled check the connections, top over and grill all working, Timer working but still can not get over to work
-
eSpares Staff at eSpares says...
We have a video to help diagnose problems with your oven www.youtube.com/watch?v=_lWk22-qvoI just copy and paste into your browser.
I have changed both grill and cooker element and oven working fine but blowing cold air all the time. It's a John Lewis model
-
Chris at eSpares says...
Most models cool the control panel with a fan that may run unless all controls are in the off position.
I have replaced the element and its still not working. Do I need to to shop for a new oven? 1 Answer
I have a Zanussi ZHF470X I suspected the element had blown so I've changed it. I can now not turn on the bottom oven, neither the LED indicator or fan come on. The top oven and grill work fine so I dont think its a problem with the feed to the unit.
-
Rory at eSpares says...
Hi there. I'd advise going back and having a look to make sure that the element is fitted and wired correctly - just one slightly loose wire could be to blame.
- Hi Dave Just got my old element out of the bin. Centers of the 2 base fixing holes are 128mm apart, the element connectors are 90mm apart. Measurement from center of base plate to center of third fixing point is 125mm. Hope this helps
Will this part fit my appliance?
Check Now
