Microwave Wave Guide Cover - 130 x 72mm Stock Number: ES132411
Genuine spare part for select models of Sharp microwaves
Microwave Wave Guide Cover
A damaged waveguide cover can lead to sparking around the mica sheet during the cooking cycle, which if not dealt with can also lead to the cavity being burnt as well. eSpares could soon get your microwave back in full working order - meaning you will be able to enjoy those quick tasty meals in no time!
Specification:
- Dimensions: 130 x 72 mm
Genuine spare part for select models of Sharp microwaves.
Prior to ordering, please check the list of appliances to ensure this is the right part for you.
8 Questions and 8 Answers
-
eSpares Staff at eSpares says...
The waveguide cover only needs to be replaced if it is damaged.
-
Chris at eSpares says...
We are sorry but do not have any dimensions for this product. In order for us to source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
- It fits either way round and should not matter. The mica is there as a protection only from food getting into the microwave vent. Slide one end in and carefully bend the mica at its center to allow the other slot to fit under the metal tab.
- Microwaves do not flow down wires, but are guided through a metal duct from the megatron into the microwave oven cavity. To prevent foreign objects from entering the waveguide, a cover needs to be fitted. This has to be transparent to the microwaves but also strong enough to prevent it collapsing under use. A wave guide is made up of mica layers
wave guide covers that could be made to fit Sharp microwave-combi R-7E55
-
Rory at eSpares says...
Hi Matey, I'm afraid the wave guide cover for the R-7E55 has been discontinued by our manufacturers.
