Top Freezer Flap: 385 x 155mm Stock Number: ES1534045
Genuine spare part for select models of Howden and Lamona fridges and freezers
Manufactured by Beko
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Top Freezer Flap: 385 x 155mm
If you have you cracked, or damaged the top pull down flap in your freezer, eSpares could have just the solution here. We have this replacement flap that could soon be added inside your appliance, so you can get back to storing your food items in a safe and reliable way again.
Specifications:
- Dimensions: 385 mm x 155 mm
Genuine spare part for select models of Howden and Lamona fridges and freezers.
Please check the list of appliances prior to ordering to ensure this part will fit your model.
Please Note: This is the top pull down freezer flap and not the freezer drawer front.
4 Questions and 6 Answers
Any tips on how to fit this flap to freezer in use? Daren't apply too much pressure to insert toggles into holders in case they snap off!! 3 Answers
- Thanks DEM for replying. We did exactly the same in assuming all 4 had to be inserted but then realised only the bottom 2 needed to be positioned then the others connected when the flap folded up! Luckily for us we didn't break ours and it fits absolutely perfectly!
- Hello HCW I had the same problem! Then I realised you don't have to insert all four of the toggles at the same time, just the bottom two (one on each side) then gently push the door up into place and the top two toggles slip into place to close the door. Not before I'd cracked the flap with previous attempts!
-
Chris at eSpares says...
The hinge sockets can usually be unscrewed from one side to allow the flap to be fitted and twisted into position.
I know this fits my model number but the part is called a flap but will this part also replace the front of a compartment? The measurements seem to be correct but we need a front drawer cover not a flap?
-
Chris at eSpares says...
We are sorry but do not have this part in stock so are unable to provide information or dimensions for this product. We think this might be a cover not a flap.
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
Can anyone please give me the exact measurements of this flap. The last one I ordered through a different company was too big although was supposed to fit HJA6852. It is for the top freezer shelf not for a freezer drawer. Thanks very much.
-
Chris at eSpares says...
Dimensions : 385 x 155 mm
Will this part fit my appliance?
Check Now
