Fan Oven Element - 2500W Stock Number: ES1548690
Spare part suitable for select models of Creda, Hotpoint, Indesit and Cannon ovens
Manufactured by Hotpoint
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Fan Oven Element - 2500W
If you have noticed that the fan oven is not heating up as usual, well this could be due to a faulty fan oven element. This element is the circular element in the oven and can fail if the internal filament burns out - causing a short circuit.
If this has happened to your element, or you have noticed visual signs of a split, bulge or blowhole on the element, then it sounds like it is time to get it replaced.
eSpares has this replacement fan oven element, which could soon be fitted in your oven to bring back the heat - and get you on your way to cooking those great tasting meals again in no time!
Specification:
- 2 Turns
- Wattage: 2500 Watts
- Voltage: 240V
- Height: 216 mm
- Outer Diameter: 251 mm
- Bracket: 68 mm
- Tags: 38 mm
Spare part suitable for select models of Creda, Hotpoint, Indesit and Cannon ovens.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
5 Questions and 3 Answers
I've disconnected the old element from my fan oven but one of the two cables that connect to the element has dropped into the cavity behind the oven. How do I retrieve it without having to move the entire cooker away from the wall. 1 Answer
Cannon fan oven 10450G
-
Dean at eSpares says...
If the cables have dropped into the back the only way to retrieve them is to take the oven out and remove the back panel, you must have the oven disconnected to access the back panel.
cannon model no 20175E
-
Chris at eSpares says...
It is likely the fan is turning too slow so the element is overheating, check and replace the fan if required.
I want to remove the back plate but first I must remove the lamp cover. It is extremely stiff and will not budge. Can you help?
-
Chris at eSpares says...
Try heating up with a hair dryer or squirting some releasing fluid like WD40 or use a strap wrench for removing jam jar tops available from supermarkets.
Will this part fit my appliance?
Check Now
