Washing Machine Heater Element - 230V 2050W Stock Number: ES1551983
High quality spare part for select models of Bosch, Neff and Siemens washing machines
Manufactured by Electruepart
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
High Quality Replacement Washing Machine Heater Element - 2050W
If the water in your washer is not its usual high temperature, there could be a problem with the heating element. With this genuine replacement, eSpares could soon have your washing machine back with hot water for rapid cleaning performance.
Specification:
- Wattage: 2050W
- Voltage: 230V
- Single Tag Type
- Earth Tag
- Full length of element: 265mm
- Length of element to bracket: 235mm
- Width of element: 65mm
- Length of element to tubliar bend: 175mm
Compatible spare part for select models of Bosch, Neff and Siemens washing machines.
Please check the model fit list prior to ordering this item to ensure compatibility with your appliance.
9 Questions and 9 Answers
Water was not being heated. Replaced open circuit heating element with new one but still not heating up. Measured NTC temperature sensor resistance of 7K ohms at 20 degrees. Please can you tell me if this is faulty. 1 Answer
-
eSpares Staff at eSpares says...
If the NTC changes it's resistance reading when at different temperatures is OK, you will need to test the rest of the heater circuit with a multimeter.
I think the element has gone on my Bosch washing machine, it started to smell and then something went pop and the trip went. What resistance should should the heating element be? 1 Answer
I have removed the existing element and checked with a multimeter and iy reads 22 ohms
-
eSpares Staff at eSpares says...
We have an article and video to help www.espares.co.uk/advice/careandmaintenance/how-to-diagnose-a-faulty-washing-machine-heater just copy and paste into your browser.
My bosch washer gets stuck on 1 minute and doesn't finish it's rinse. Most q&a sites say it's the heater element. Is it worth getting a thermostat too as it looks like a ball ache to strip down to replace if not the element. Thanks in advan 1 Answer
-
eSpares Staff at eSpares says...
You will need to test the heater and thermostat with a multimeter to determine what has failed, we have a video to help www.youtube.com/watch?v=Ftm8lDVVw2E just copy and paste into your browser.
Hi on a Bosch washer WAE24162 the rinse water is hot, can here the heater element heating the water, would this mean the thermastat needs replacing,it is definitely plumbed in correctly this has been going on for the last month,
-
Dean at eSpares says...
The heating phase is controlled by the PCB and not the thermostat, the thermostat will normally turn the heat off when reached the correct temp on a heating program and not on a rinse.
On my Bosch Classix 6 Vario Perfect WAE24167 UK/40 , when the element is replaced do I have to reset error codes?
-
Dean at eSpares says...
We don't believe you have to reset the error code stored.
Will this part fit my appliance?
Check Now
