Tumble Dryer Water Pump Stock Number: ES1591667
High quality spare part for select Ariston, Creda, Hotpoint, Indesit and Proline tumble dryers
Manufactured by Electruepart
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
High Quality Replacement Tumble Dryer Water Pump
If the clothes in your dishwasher are still damp at the end of the cycle, then it may be caused by the water pump. The function of the water pump is to remove waste water from the machine at the end of each cycle. With this replacement part, you could soon get your appliance back into working order, and get back to warm, dry clothes again.
Specification:
- HANYU B13-6BG06262
- 12v
Compatible spare part for select Ariston, Creda, Hotpoint, Indesit and Proline tumble dryers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
2 Questions and 2 Answers
My indesit condenser dryer idc75uk the light is on to empty the water but the water tray is empty. I've looked in the casing at the back and water seems to be collecting in there I drain it the light goes off but back one again within the hour is it the pump I need?
-
eSpares Staff at eSpares says...
It is likely to be the pump so test it with a multimeter to determine if it has failed.
My AQCF852BUUK tumble drier trips my electricity, I removed my condenser and behind it was full of water, I've dried it out but there's no change. Has my pump gone? Would I be able to fit one myself? 1 Answer
-
Chris at eSpares says...
It is likely the pump has failed and this has caused the electric to trip when water is blown up onto the heater. It is a relative simple job to replace the pump, carefully prise the housing off the back using a large flat bladed screwdriver. remove connections from motor and unclip it from the housing cover. Then refit and reassemble.
Will this part fit my appliance?
Check Now
