Washing Machine Double Inlet Solenoid Valve Stock Number: ES1639870
Compatible spare part for select models of Bosch, Neff and Siemens washing machines
Manufactured by Electruepart
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Double Inlet Solenoid Valve
If you’re finding water from your household supply is not filling into your washing machine, it could be time to replace the solenoid valve.
The solenoid valve is an electrical component that opens when current is applied to it and allows the machine to fill with water. With this replacement we could help get your appliance back in full working order.
Specification:
- Angle: 180°
- Type: 2 Way
- Connector: Tag
- Bore: 10.5mm
- Cold Water Inlet
Compatible spare part for select models of Bosch, Neff and Siemens washing machines.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
4 Questions and 4 Answers
Hi can you please tell me if this unit operates at 240volts and if not what is the voltage rating thanks Ken Osborne 1 Answer
-
Parminder at eSpares says...
Sorry, but we have not been provided with this information from the manufacturer. The parts listed on our website are all model and serial number dependant (apart from universal parts). In order for us to locate the correct spares for your appliance we would need the model information. Without this we cannot guarantee that the part ordered will be the correct one for your appliance. For help in finding your model number please see this link: www.espares.co.uk/findingmodelnumbers
when m/c is left for a couple of days the bottom of the drum has about a 1" of water in it was wondering if inlet value is seeping 1 Answer
-
eSpares Staff at eSpares says...
It is likely the valve is letting in water but check the plumbing in case the machine is backfilling into the washer.
machine gave an F21 fault shortly after a power cut, have cleared the fault but machine still won't operate. 1 Answer
I have checked the brushes on the motor and while they are down to the last 10mm they still run the machine on a spin cycle. I then tried another cycle and this time the machine showed an F17 fault which is the solenoid valve This is where I believe the real problem lies. Can you confirm if this makes sense and should I replace the solenoid valve
-
Chris at eSpares says...
F17 occurs if the machine has not filled to the correct level in the allowed time. If it is filling at all check the water is on full. If it does not fill see our advice centre for more information.
My Bosch W/machine will not move from the wash cycle to the rinse cycle but if I add a kettle of hot water it completes the cycle. The heating element and thermostat seem to be OK though ( as checked by eSpares) Do you think it could be the solenoid 1 Answer
Model no is WFL2066GB/08
-
Dean at eSpares says...
If it has filled with water at the start of the wash cycle it would suggest the valve is ok, meter the element and thermostat to confirm they are ok. Check out our advice centre for more help copy and paste into your browser http://www.espares.co.uk/advice
Will this part fit my appliance?
Check Now
