Washing Machine Pressure Sensor Stock Number: ES1662605
Genuine spare part for select models of Balay, Bosch and Siemens washing machines
Manufactured by Balay
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Pressure Sensor
The pressure switch will help ensure that the drum is not under filled or over filled with water, and will prevent potential leaks around the appliance by stopping excess water from entering the drum. If the pressure switch fails, the pressure of the water cannot be determined, and the machine will not start.
With help from eSpares and this replacement pressure switch, you can soon be back to a fully working washing machine - so you can tackle the laundry again in no time!
Genuine spare part for select models of Balay, Bosch and Siemens washing machines.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
2 Questions and 2 Answers
I have a Bosch Max 6 that is not draining properly, the flow is very slow. I have replaced the pump and checked all the hoses. I have seen elsewhere this problem was resolved by a new pressure switch but unsure whether it would affect the amount of water being pumped out, could it be an issue here? I have no error codes and the machine washes as normal, just takes several spin/drain cycles to get rid of the water. Thanks Tom
-
Parminder at eSpares says...
Please view our advice centre article for more information on this fault: https://www.espares.co.uk/advice/careandmaintenance/how-to-diagnose-washing-machine-drain-and-pump-problems
Hi, my Bosch Washing Machine when switched on to wash my clothes it keeps getting to hot and there is steam coming out of the Powder Draw. Can you please recommend what faulty parts might be causing this? Thank you.
-
Chris at eSpares says...
Most Bosch machines use a NTC sensor mounted through the heater fitting that monitors the water temperature. This could be the problem but if this is not the fault then the problem is likely to be the control board.
Will this part fit my appliance?
Check Now
