Fridge Freezer Control PCB Module Stock Number: ES1671223
Genuine spare part for select models of Beko and Blomberg fridge freezers
Manufactured by Beko
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Fridge Freezer PCB
Has the PCB for your fridge freezer been damaged or failed you? If so, it's vital that you replace it in order for your appliance to work again. The PCB acts as the refrigerator's brain, but replacing it is now possible thanks to eSpares. This genuine spare PCB from Beko could be all you need to make life in your kitchen better than ever.
Genuine spare part suitable for select models of Beko fridge freezers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
Please Note: This part is just to connect the control knob to the PCB.
9 Questions and 10 Answers
Beko CDA565 upper fridge now becoming a freezer what parts can I replace to correct fault. I keep seeing that the thermostat cannot be replaced is this correct? 2 Answers
- Mine has become a freezer too, any advice please ? been quoted £125 for a call out
-
Dean at eSpares says...
It is difficult to test the PCB so check for any signs of damage if the internal sensors have failed we believe they are not replaceable.
Fridge freezer stays on the whole time resulting in fridge becoming a freezer. This suggests a thermostat issue. 1 Answer
Lamona/Becko HJA 6855E1. There is a pcb with temperature knob in the light housing and another main pcb on the back. The black sensor on the evaporator seems to change resistance when heated by holding. Which is the most likely pcb to cause this.
-
eSpares Staff at eSpares says...
The sensor does change resistance when it changes temperature which is perfectly normal.
I have a beko fridgefreezer,K60315H/B776, and it doesn't get cold in either the fridge or freezer. All looks free from dust etc. The light in the fridge comes on but I don't here any noises from the unit or compressor,any ideas on the part to replace 1 Answer
As above in the question I am not sure if it's the compressor or the PCB? I don't want to spend a fortune fixing it has it's only my garage fridge but would be nice to fix. If you could advise it would be very appreciated.
-
eSpares Staff at eSpares says...
You would need to use a multimeter to test the components starting with the compressor first, you cannot test the PCB so look for any signs of damage.
The temperature in my freezer is swinging from +3 to -22. Can you advise is it PCB, compressor or thermostat. If thermostat is it changeable?
-
Dean at eSpares says...
In order for us to help we would need to identify your model’s details, please provide us with the following information: Appliance make, model and the serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
Hi can you help with a Beko fridge freezer 5 years old . The compressor is running and the internal fan is also running . The freezer is not cold and i have checked for any ice build up underneath the plastic panel inside the freezer which is ok. 1 Answer
The model is K54299H / B725 u Serial number 1210147908
-
Chris at eSpares says...
If the compressor is running there should be cold areas om the freezer evaporator unless there is a compressor/system fault which would require a refrigerator systems engineer to repair.
Will this part fit my appliance?
Check Now
