Get The App From Play Store!

Skip to main content

BLACK FRIDAY EVENT use code BF25 at checkout to SAVE 25% when you spend £30 or more excluding delivery.

BLACK FRIDAY EVENT use code BF25 at checkout to SAVE 25% when you spend £30 or more excluding delivery.

Dishwasher Recirculation Pump Motor Stock Number: ES503473

Genuine spare part for select Bosch, Neff, Siemens and Balay dishwashers

Read more

Manufactured by Bosch

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Dishwasher Recirculation Pump Motor

If your dishwasher is in new of a new pump motor, then perhaps this genuine Bosch spare may be able to solve some of your problems.

Specification:

  • Type: ISOL.KL 5600.001385 M01499
  • Voltage: 230-240v

Genuine spare part for select models of Bosch, Neff, Siemens and Balay dishwashers.

Please check the list of suitable models to ensure that this spare part will fit your appliance.

Ask a Question

2 Questions and 2 Answers

Water is not getting into the Bosch dishwasher model SGI3002GB/07. When I pour water in to dishwasher & switch it on, the water drains off. I thought there could be problem with inlet valve but the the repairer says it is because of faulty circulating motor and that the dishwasher is flooded. Is it so? I don't see any flooding.

By Anonymous - - 16 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    For information on this problem see our diagnosis video: How to Diagnose Dishwasher leaking and heating problems http://www.espares.co.uk/advice/3/2083/how-to-diagnose-dishwasher-leaking-and-heating-problems

Answer this question

I have changed the inlet solenoid valve as I thought it wasn't filling, but there is water getting into the washer as the machine automatically goes into a drain cycle and there is water being emptied each time, but no water being distributed in the machine. Is the pump the only possibility now or is there something else, before I purchase one

By Shakey - Tamworth, staffs - 15 May 2014
  • Chris from eSpares
    Chris at eSpares says...

    A common problem with Bosch dishwashers is due to grease build up in the hose that 'feeds' the sump when filling. If this gets partially blocked the water will lift a float on the chamber at the side to indicate a over level problem and turn on the pump to empty. Remove the hose from the float chamber to the base (simply pulls out) and clear of any build up before retrying.

Answer this question

Will this part fit my appliance?

Check Now

Dishwasher Recirculation Pump Motor

£210.04
(inc. VAT)
£210.04