Pressure Washer Inlet Elbow Assembly - Version 1 Stock Number: ES538422
Genuine spare part for select Karcher pressure washers
Manufactured by Karcher
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Pressure Washer Inlet Elbow Assembly - Version 1
If you've been noticing a lack in the suction pressure of your pressure washer, it's most likely a faulty inlet. If this has split, or the seal is slightly worn it can drastically affect the power intake. This replacement L shape plastic inlet elbow assembly is a genuine Karcher spare part.
Specification:
- Dimensions: 30 x 70 x 100 mm (H x W x D)
Please Note: Check the image below, if the part you need is positioned underneath the control head, then this is the correct part. If it is positioned to the left or above the control head, then this is not correct part you require.
Genuine spare part suitable for select models of Karcher pressure washers.
Please check the suitable model fit list, and the information stated above, to ensure that this is the correct part for your appliance.
Important - Please Note:
- This is version 1 and fits into the pump and held in with the metal cover
If you need help finding your model number please view our Karcher video tutorials section.
Please note: This spare is chassis number and serial number dependent. Please contact our call centre with this information so we can check the spare is correct. Your chassis number will look similar to 1.504-604.0.
Karcher spares reference: 9.001-187.0
19 Questions and 20 Answers
your video on how to fit shows the engineer removing a clip. This clip is not on my washer a K3.99M, how do I fit the assembly
- I cannot find the release clip for the Inlet Elbow on my K4.99, do I need to try something else?
-
Rory at eSpares says...
Hi bert, the inlet fits in the same was as the video above, but rather than a clamp holding it in to place, the cover acts as the clamp.
for a karcher K3.99M (1.423-245.0)
-
Dean at eSpares says...
You will need to split the casing, here is a video to help www.youtube.com/watch?v=qsa9DrI5szI&t just copy and paste into your browser.
-
Chris at eSpares says...
There should be information on the ratings label. This part is suitable for a K3.90 model
-
Parminder at eSpares says...
We believe a torx kit will be required. Please see the link below for our "9 Piece Torx Head Screwdriver Set", www.espares.co.uk/product/es1251179
Looks like the part that broke on mine. Serial no. is 291975.
-
Chris at eSpares says...
To source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
Will this part fit my appliance?
Check Now
