Thermostat K59-L2025 Stock Number: ES550991
Genuine spare part for select AEG, Arthur Martin, Electrolux, Privileg, and Zanussi fridge freezers
Manufactured by Electrolux
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Thermostat
If you are noticing that the temperature in your fridge freezer is not consistent, or has changed from what it has been set to, it could be due to a faulty thermostat. The thermostat in your fridge freezer regulates the temperature to help ensure your food is kept at the correct temperature.
Specification:
- Type: Ranco K59-L2025
- Voltage: 250v
Genuine spare part for select AEG, Arthur Martin, Electrolux, Privileg, and Zanussi fridge freezers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
4 Questions and 4 Answers
Hi i have a Zanussi Fridge Freezer ZI 918/12KA, the light coms on when i open the Fridge door but the Fridge isn't cool at all. The Freezer cools occasionally but doesn't freeze. I have watched your video on changing the Thermostat but am unsure if this is the problem, i have tried turning it to zero then turning the dial to hear any clicks but nothing. please help.
-
Chris at eSpares says...
If the motor is stopping for long periods then a new thermostat may be required. If the motor is continually running but the fridge is not cold enough the problem may be lack of gas or a failed compressor or too warm a position.
Hi Your video for replacing the thermostat on the Zanussi is great unfortunately my Electrolux ER 7831 I doues not have a screw cover as shown. How do I remove it from the side of the fridge to fit the thermostat? 1 Answer
-
Christopher at eSpares says...
The thermostat housing is likely to be fixed to the cavity wall with a locating screw (may be behind the knob or under a plastic bung or even under the light lens), and a slot or locating peg. Once the screw is removed the assembly is slid to disengage the locating peg or slot and allow removal.
I have an Electrolux fridge/freezer type ER7831i, product number 925694601. Despite being on the lowest setting, this is running constantly, causing both fridge and freezer to ice up. Is the likely cause a faulty thermostat? If so, is the thermostat loc 1 Answer
-
Rory at eSpares says...
Hi Tony, I'd say it's either the thermostat or the door seal that is causing this problem. If the seal is damaged, heat is being allowed in to the fridge and therefore the motor works too hard to keep the fridge cool, resulting in frost. Check the seal for signs of damage and make sure that it sits snug with the door. If that doesn't help, it's probably the 'stat. The thermostat is located behind the housing on which the thermostat control knob sits.
i have electrolux fridge/freezer (er7831I) pcn. 925694601, ser. 93900209. The freezer works perfectly but the fridge does not work, i think it is the thermostat but could you verify. i have been looking for them but could not find for my type pcn number. could you help. thanks ian.
-
Rory at eSpares says...
Hi Curlyian213 This is the correct thermostat for your Electrolux ER7831I fridge freezer. However we can't guarantee that it is your thermostat playing up and if unsure we would advise you to contact your local fridge freezer or Electrolux specialist.
Will this part fit my appliance?
Check Now
