Washing Machine Rear Drum Bearing Stock Number: ES551882
Genuine spare part for select models of AEG, Arthur Martin, Electrolux, Elektra, Frigidaire, Prima, Privileg, Rex, Tricity Bendix, Zanker, Zanussi and many other brand of washing machines
Manufactured by Electrolux
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Rear Drum Bearing
If you can hear dreadful noises coming from the washing machine when washing, then most likely the bearings have become faulty or loose. The bearings support the drum in spinning smoothly during every wash cycle. With this replacement rear bearing from eSpares, you could soon have an effortlessly working washer again.
Specification:
- Measures 20 x 47 x 14cm
- 6304ZZ
This is a genuine spare part for select models of AEG, Arthur Martin, Corbero, Curtiss, Electrolux, Elektra, Elktro Helios, Firenzi, Frigidaire, Lux, Prima, Privileg, Rex, Rosenlew, Tricity Bendix, Zanker, Zanussi and Zoppas washing machines.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
4 Questions and 4 Answers
Do I really need to replace the front bearing?
-
Chris at eSpares says...
You should always replace both bearings, the bearing seal and the tub seal when replacing bearings.
i want to change the bearings on tricity bendix bIw 105w will i need the bearing seal and the other 2 bearing and will i require anything else thanks 1 Answer
- Two bearings, the seal, some grease (e-spares sent me the grease without me ordering it) is all you need. Watch the online video to see how to do it, and get on with it. It is not a quick fix, you need patience and the time to do it. Allow yourself a whole morning or whole afternoon to accomplish the task. It goes back together much quicker than taking it apart because it takes time to figure out how it all dismantles.
-
Rory at eSpares says...
Hi Stupid, there are two bearings that go in the F1245W, http://www.espares.co.uk/part/washing-machines/electrolux/p/1085/15/0/0/502482/washing-machine-rear-drum.html and http://www.espares.co.uk/part/washing-machines/zanussi/p/1085/332/0/0/104213/front-drum-bearing.html.
Can you tell me if the bearing is easy to fit? and if any specialist tools are required? Thanks Ally
-
Rory at eSpares says...
Hi Shark This part shouldn't cause too many problems to fit - you just need a screwdriver and a certain amount of patience. As the name gives away this bearing is fitted at the rear of your washing machine, and you will have to take a couple of bits apart but I'm sure you're up to the task. If you feel you aren't however we always recommend getting in touch with your local handyman or washing machine specialist. Good luck!
Will this part fit my appliance?
Check Now
