Hob Energy Regulator - 50.55021.100 Stock Number: ES930098
Genuine spare part for select models of Bosch, Neff and Siemens cookers
Manufactured by Neff
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Hob Energy Regulator
The function of the energy regulator in your oven, is to ensure the temperature is regulated correctly. The energy regulator is an "infinite switch" that controls the temperature of a the burner (or ring) on the hob of an electric stove or cooker.
If you are experiencing a problem with the temperature, it could be time to replace the energy regulator with this replacement from eSpares.
Specification:
- Type: EGO 50 55021 100
Genuine spare part for select models of Bosch, Neff and Siemens cookers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
3 Questions and 3 Answers
my nef hob t1252noeu is faulty, bottom lh. heater. it initialy comes on then before full heat reduces/stays at warm+ temp. is the likely cure replacing the energy regulator?. can you provide?.is it relatively easily fitted by diy ? Thanks for your help. 1 Answer
-
Chris at eSpares says...
It is likely to be the regulator and the closest video we have is How to fit a multi position switch on a hob www.espares.co.uk/advice/1/1953
The base which connects to the base of the Energy regulator has burnt out.Ident Nos on part is 361 - 017 could you please advise if you can supply 1 Answer
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
I have a Bosch Hob, model No.PKN815CEU/01, which I am currently experiencing a fault with both back rings, one of which is a double burner. 1 Answer
My problem is when I switch them on, they both will come on and heat up, but after a minute or so go back off again for another 30 seconds or so and then start heating up again. So the temperaure on each ring does not seem to be regulated. Would my problem be the regulators and if so, is there a different regulator for the single ring and another regulator for the double ring. If this is the case, do you have them in stock and what would your best price best. Many thanks for your assistance.
-
Chris at eSpares says...
It is normal for a ceramic hob to 'cycle' the heat to the rings to prevent overheating and damaging the glass hob top. This is especially noticeable if the rings have halogen elements. If you have moved house or 'acquired' this hob top and are not already familiar with its operation there may be no fault. If these rings are the same type as others that behave differently on the hob then the controls may be faulty.
Will this part fit my appliance?
Check Now
