Oven/Grill Thermocouple - 1300mm Stock Number: ES871187
Genuine spare part for select models of Indesit, Hotpoint and Ariston cookers
hi my cannon chester field grill will not stay on. it will light ok but when knob is released it goes off any idear of cause 1 Answer
the cooker about 5 years old the ignition works ok and the top oven works ok only the grill does not stay on
-
Chris at eSpares says...
The problem is likely to be the thermocouple.
Hello. I need this to go in to the Top Oven on my DVG692WP to keep the Grill Lit. Will this be the correct part please and how easy or hard is it to fit
-
Chris at eSpares says...
eSpares sells a wide range of products to both consumers & trade customers. Unfortunately, due to the nature of your enquiry, we cannot advise on repairs of this type. We recommend that only people registered with the Gas Safe Register make this type of repair. Maybe a good option for you would be to use a repair company like "Repaircare" who offer a fixed price option.
is it the T/C? model K3G2(w) G
-
Chris at eSpares says...
Check the oven temperature regulates correctly (can be + or - 10%) with a thermometer like Stock Number: ES462035. If the temperature is correct then you either need to preheat the oven more or change the shelf height to get the best results.
I turn on the top oven and a small flame appears at the back of oven but this flame never gets any warmer irrespective of weather the oven knob is on no.1 or no.8, unable to cook anything in top oven.
-
Chris at eSpares says...
Until the thermocouple informs the control that the flame has warmed its end to the correct temperature the valve will remain set to low. It may be the pilot flame jet contaminated or a faulty thermocouple or less likely the valve itself.
Does a Thermocouple need to be fitted by a Gas/Corgi registered engineer or can it be fitted by myself? Many thanks Stewart
-
eSparesMalindi at eSpares says...
We would strongly advise that an engineer fitted the part rather than yourself.
when i switch the grill on the fan use to come on straight away and now it takes 10 mins then fan switches on do think its the thermo couple or would it be the switch 0 Answers
if it is the switch could you tell me the part number please.
Will this part fit my appliance?
Check Now