Over 1 million spare parts
Over 500 brands
Over 800 appliance repair videos
Tumble Dryer Heater Element Assembly - 2300W Stock Number: ES1073664
High quality spare part for select models of Hotpoint, Indesit and Proline tumble dryers
-
Chris at eSpares says...
If it is a condenser drier and trips after several minutes it is likely condensation water is getting onto the heater element. Check the condenser is clean and the drain to the tank is not blocked, always empty before each cycle.
I just bought this product and installed it.... Is it supposed to give off smoke and be extremely hot on 1st use? Not too sure whether to use my drier now :0/ .. 1 Answer
condenser dryer is not heating up and empty water light is on constantlyon already replaced 1 Answer
condenser dryer cdi75uk
- Try the trip out switch at the top of heating eliment u will need a pin to turn it back on
-
Rory at eSpares says...
Hi there, check out this video for help: http://www.espares.co.uk/advice/tumble-dryers/a/9/1284/how-to-fix-a-dryer-thats-not-heating-up-hotpo.html
I have recently replaced the belt and spindle on my proline, all went well and the drum was spinning correctly. Unfortunately, before I found the problem, my machine had overheated and tripped the thermostat at the back of the machine. After finding out h 1 Answer
- Watch out for the insulation strips that keep the heater element from contacting the metal case. The domestic circuit breakers will pop / plug fuse will blow. These insulators are too small in their design. If the heater elements overheat then these may become brittle and the element may also sag allowing it to come into contact with the metal case. Ensure also that fluff is not allowed to build-up because there is a fire hazard if the element overheats & fluff is present. When installing a new heater element take the opportunity to ensure that you've thoroughly de-fluffed the machine.
My Hotpoint Condenser Dryer (CTDOOP) does not heat up - everything else works perfectly but no heat.
-
eSparesMalindi at eSpares says...
Please contact an engineer or the manufacturer of your appliance for technical questions because we cannot advise unfortunately.
Will this part fit my appliance?
Check Now