Washing Machine & Tumble Dryer Stacking Kit With Shelf Stock Number: ES1431045
Replacement stacking kit for appliances up to 60 x 60cm maximum width
Dryer model is Zanussi TC180. Also, does depth matter as the WM is 450mm and dryer is 420. Will it still be secure? (The protruding doesn't matter to me) Many thanks!
-
Chris at eSpares says...
This should be suitable.
THE GRUNDIG MEASURES A WIDTH OF 59CM AND A DEPTH OF 57CM THE HOTPOINT MEASURES A WIDTH OF 59CM AND A DEPTH OF 51CM
-
Chris at eSpares says...
We do not have details of all machines but believe this kit should be suitable.
I'm looking for a stacking kit for my Hoover Dynamic Next DXCC69W3. I need to sit a Beko tumble dryer on top (it's already sat on but of course the weight won't be evenly distributed and I don't want to damage the new washer). Any help please? 1 Answer
-
Chris at eSpares says...
If both are approximately 600mm wide this kit will fit them better.
The John Lewis model jlwm1606 has an angled control panel across the top front of the machine. To enable access to this, the dryer would need to be stacked about ten centimetres back from the washer. Obviously, the washer would protrude by ten centimetres at the front and the dryer would overhang by the same amount at the back. We can live with this, but will the stacker work this way?
-
Chris at eSpares says...
We believe you can use this to stack in this manner.
I'd like to stack a 54cm deep Beko dryer on top of a 50cm deep Beko washing machine, but don't want the stacking kit to protrude out the back (I have a small space it needs to fit in). What is the depth measurement of the stacking kit?
-
Chris at eSpares says...
This kit is approximately 600 mm by 600 mm
Once the machines are stacked up and strapped together how do you undo the strap if need be? 1 Answer
-
Chris at eSpares says...
To release a tie strap open the ratchet as if tightening and take the tension as you start to retighten. Once the adjuster is under tension slide the ratchet lock to the open position and allow the tension handle to unwind. Repeat until loose.
Hi I have a zanussi washer with a beko condensing tumble dryer. Can you recommend a stacking system for this combination 1 Answer
-
Chris at eSpares says...
This should be suitable for most appliances that are 600mm wide.
can i stack with a kit john lewis 7kg washing machine JLWM 1205/1412 60w x 46d credo dry simplicity tumble dryer T520VW - 60w x 50d thanks
-
Chris at eSpares says...
This is a universal kit. we do not have a list of appliances that it is confirmed to fit. It should be suitable for most appliances that are 600mm wide.