Top Oven Twin Grill Element - 2660W Stock Number: ES867045
Genuine spare part suitable for select models of Hotpoint, Indesit and Whirlpool cookers
I have had a few Hotpoint cookers in the past and have never had the grill elements bend down like this. I have a job trying to push the grill pan back in with anything on it. We have only had the cooker for about 18 months.
- Our grill element was drooping so badly we could hardly get the grill pan into it. I was just about to book a repair and then thought i may as well try bending it back into place. It's almost as good as new now, no repair man needed. Just make sure everything has cooled down.
- There is another reason for the element to bend down. Sometimes the metal linking strip, across the element, moves forward on the element. This means that the retaining lugs on either side no longer engage correctly with the sides of the grill, leaving the element with no support except at the back. So it sags down (sometimes quite a long way) at the front. You can try to slide the metal strip back along the element, but it's probably stuck. In that case, replace the element.
-
Chris at eSpares says...
Grille elements frequently work when the metal is glowing cherry red or red hot. At this temperature the metal is approaching its melting point and it is not unusual for an element to droop in this manner. If this distortion is significant then it will be necessary to replace the element.
Our Hotpoint DU2549BL grill cuts out completely after varying amounts of time, when this happens the top oven will also not work. Leaving for a short time will generally get it working again.Would this likely be an element or a switch/regulator issue? 1 Answer
-
eSpares Staff at eSpares says...
The most likely problem would be the thermostat so start there but also check for any signs of damage or burning to the element and switches.
Is it a fairly easy task to replace the Grill / Top Oven element on my Hotpoint HUD61GS? Do I need to take everything apart? 1 Answer
-
eSpares Staff at eSpares says...
The grill element can usually be removed from inside without taking everything apart, there should be screws going through the element holding it on.
I have a hotpoint DH53K and the top grill will work sometimes and Outher times it won't can you please advise 1 Answer
-
eSpares Staff at eSpares says...
You will need to check the switch and thermostat, test the element with a multimeter to determine if it has failed.
i have a hotpoint DHS53CXS double oven, but only the right half of the double grill in top oven is heating up. Do i need a new element or could it be something else? 1 Answer
-
Chris at eSpares says...
The problem could be the element or the control. Examine the non working element carefully for signs of damage that may show it has failed.
I have a built in double oven, when I turn the grill on nothing works, the light on the button doesn’t come on and the heating element don’t work, but when I turn the top oven on this works but then if you turn the grill on again the light with the button comes on but the heating element still don’t work? So would this just be the grill element that needs replacing?
-
Chris at eSpares says...
If the element gets hot the problem may be the oven/grill selector switch.
Hotpoint openspace oven. When we run the grill full temp - after some minutes it works but then trips the mains 1 Answer
The grill appears to work ok and has done for years but now it works for a period then trips the mains.
-
Dean at eSpares says...
The problem is likely to be the element
The grill and top oven are combined
-
Dean at eSpares says...
if the grill element is working check the base element and thermostat
When fitting a new grill do I have to remove the oven to access the back or is it as simple as undoing the two screws & push fit the new grill in place 1 Answer
-
Chris at eSpares says...
From the parts image it appears the fixing holes do not have screw threads so we believe if this is for your grill it should be able to be removed from within the cavity. This can be confirmed by looking for the screw heads on the bracket.
Hot point cooker uh53ws. Order code 5045382367278. CMp766. 259
-
Chris at eSpares says...
It is likely if you have checked the element connectors the problem will be the switch Stock Number ES1017170
Will this part fit my appliance?
Check Now